Select a server and platform to install

For each server on the network pane, you select the relevant platform to install according to the CFE guide tailored for the deployment.

Procedure 

1. From the Network pane, select the server (machine) and verify that it is ready for installation .

2. If the server has been validated using the SR Validator, the SRT displays the platform to install. Otherwise do the following:

   1. From the Group list, select the group related to the platform to install.

   2. From the Platform list, select the platform to install according to the CFE guide tailored for the deployment.

3. Verify the Install/Upgrade option is selected and then click Next.

   A Read Me window appears. Click the I Accept option and click Next.

   The Install Setup window appears. The Install Setup window displays the server roles and the third-party components to be installed by the SRT. It also indicates the status of the component installation.

4. Verify that the server roles and the third-party components are selected for installation (verify that the indication is displayed).

Indication	Status	Description
	Installed	The component has been selected for installation, or currently exists on the system and meets the required conditions.
	Not Installed	The component has not been selected for installation.
	Incompatible Version	An earlier version of the component installed on the system. A newer version will be installed.
	Installed, Prerequisite Problem	The component does not meet the minimum conditions required for the selected platform.
	Not Installed, Prerequisite Problem	The server does not meet the minimum conditions required for installation of this component.

Related information 

Server to platform mapping (Customer Furnished Equipment (CFE) Guide