Identify a voice card

To locate a specific voice card, you can select the card in the Recorder Manager list and click Identify. A light blinks on the back of the hardware indicating where the card is physically located. You can have as many cards as there are available card slots on the PC (typically maximum 15), so that when you click the Identify button, the light on the corresponding card appears.

A card’s light cannot be seen from the back of the computer/server; the light is on the board.

Procedure

Click General Setup > Voice Cards > Card and select a card.

The Identify function works for all card statuses except Removed.
Click Identify. A light blinks on the card. If the light does not illuminate, check connections (card seating and wire connectors) and retest. If the light still does not appear, the card may be defective and require replacing.