Add a new voice card

Add a new voice card to install and configure a new compatible voice card into a Recorder.

Procedure

Insert a compatible voice card (see Supported voice cards) into an empty slot on the bus of the Recorder PC.

Extreme care should be taken when inserting voice cards or any other component into a PC. Tools with magnetic tips should be used with extreme caution. Wearing an anti-static cuff is strongly recommended to prevent static electricity.
Click Operations > Start and Stop and click Reboot to reboot the system. The Recorder detects and displays the new card's slot number, serial number, and other metadata.
Click General Setup > Voice Cards > Card. The card you added appears in the left pane with a status of Newly Added.
Configure the voice card as necessary or leave all settings at their defaults and click Save.

If an unsupported card is detected, its factory default information may display. However the card cannot be configured and you should replace the unsupported card with a supported one.
Click Channels to review channels available, as described in Configure voice card channels.
Click Save. The status of the voice card changes from Newly Added to Existing.
If prompted, restart services by choosing Operations > Start and Stop.