Replace a voice card

Replace a voice card as a replacement for a broken voice card in the same bus slot. The replacement card must be the same type, must be in the same slot, and must have a status of Replaced. You then update and save the setting. The fields on the voice cards vary according to card type selected.

Procedure 

1. Click General Setup > Voice Cards > Card.

2. Select the replacement card. This card has a status of Replaced. You cannot edit the card until the card is saved and the status is Existing.

3. Click Save. The status of the card is changed from Replaced to Existing. You can now edit the card.

4. Complete the Voice Card Details screen fields for the card type by referring to one of the following:

   • Modify DP voice card properties

   • Modify PCM32 voice card properties

   • Modify NGX voice card properties

   • Modify LD voice card properties

Related topics 

View voice cards

Copy voice card configuration

Identify a voice card

Delete a voice card

Add a new voice card

Modify an existing voice card