Copy voice card configuration

Copy the configuration of a voice card with a status of Existing to one or more other voice cards of the same type, regardless of their status. The card’s model number and all pertinent configuration information is copied. Bus numbers and slot numbers are not copied.

Procedure

Click General Setup > Voice Cards > Card.
Select a voice card with a status of Existing or Removed.
Click Copy Card.A list of installed voice cards appears.
Select one or more cards, and then click Copy Config.

You can copy cards only of the same family. For example, if you select an NGX card as the source, the destination cards must be of type NGX.
Click Operations > Start and Stop and reboot if requested.

If you use an expansion chassis with your Recorder and you need to restart the Recorder, you must stop and restart the expansion chassis, wait 30 seconds, and then restart the Recorder so that all capture cards can be detected in the bus scan.